Dock shelter and automatic loading ramp for cargo bay

TECHNICAL FEATURES:
-DINAMIC LOADING CAPACITY 6.000Kg
-TRANSVERSAL LOADING CAPACITY 9.000kG (WITH RAMP IN REST POSITION)

SPECIFICATION

-HYDRAULIC UNIT WITH THREE-PHASE MOTOR, 380 V.50Hz. -SURFACE IN FE 510 SHEET STEEL, 6 MM THICK+BUCKLE WITH BOTTOM REINFORCING PROFILES
-SUPPORT LIP IN FE 510 STEEL, 12,7 MM THCK+BUCKLE WITH BOTTOM REINFORCING SECTIONS IN THE BOTTOM PART CONTROLLED BY A CYLINDER EQUIPPED WITH MAXIMUN PRESSURE VALVE AGAINST RISK OF CRUSHING BETWEEN MOVING LIP AND BODY OF TRUCK; THE LIP IS ALSO EQUIPPED WITH 2 SIDE FLAPS(WHICH CAN BE AUTOMATICALLY LOWERED I THE TRUCK IS NARROWER). WITH THE FLAPS LOWERED THE LIP BECOMES 1750 MM WIDE
-THE SURFACE+LIP ADJUST(ACCORDING TO EN 1398 STANDARDS)BOTH TO NATURAL GRADUAL LOWERING OF THE TRUCK DURING LOADING AND TO ANY ATERAL IMBALANCE.
-RAMP STOP DEVICE TRIGGERS IF TRUCK MOVES AWAY, IF LOAD BEING TRANSFERRE IS GREATER THAN 300 Kg, AND REDUCES DESCENT SPEED TO LESS THAN 0,05M/S.
-PAINTING AFTER PICKLING WITH 2 RUST PROOFING COATINGS AND APPLICATION AF DARK BLUE RAL 5010 SYNTHETIC GLAZE.
-CONTROL PANEL WITH IP 55 INSULATION RATE WITH CIRCUIT BREAKER, 1 "DEAD MAN" CONTROL BUTTON FOR SURFACE LIFT AND LIP ROTATION, MOTOR CONNECTION CABLES, 8 METRES LONG, FLAMEPROOF(CONFORMING TO IEC 20/22-2 STANDARDS).
-TOUGH RUBBER GUARDS AGAINST BLOWS ALREADY APPLIED TO FRAME.
- SIDE DEVICES PROTECTING AGAINST AMPUTATION OF FEET WITH YELLOW/BLACK ZEBRA STRIPE
-RAMP STOP SAFETY ROD FOR INSPECTION/MAINTENANCE
-CE MARKING AND INSTRUCTION MANUAL


	LOADING/UNLOADING RAMPS TECHNICAL FEATURES: -DINAMIC LOADING CAPACITY 6.000Kg -TRANSVERSAL LOADING CAPACITY 9.000kG (WITH RAMP IN REST POSITION) SPECIFICATION -HYDRAULIC UNIT WITH THREE-PHASE MOTOR, 380 V.50Hz. -SURFACE IN FE 510 SHEET STEEL, 6 MM THICK+BUCKLE WITH BOTTOM REINFORCING PROFILES -SUPPORT LIP IN FE 510 STEEL, 12,7 MM THCK+BUCKLE WITH BOTTOM REINFORCING SECTIONS IN THE BOTTOM PART CONTROLLED BY A CYLINDER EQUIPPED WITH MAXIMUN PRESSURE VALVE AGAINST RISK OF CRUSHING BETWEEN MOVING LIP AND BODY OF TRUCK; THE LIP IS ALSO EQUIPPED WITH 2 SIDE FLAPS(WHICH CAN BE AUTOMATICALLY LOWERED I THE TRUCK IS NARROWER). WITH THE FLAPS LOWERED THE LIP BECOMES 1750 MM WIDE -THE SURFACE+LIP ADJUST(ACCORDING TO EN 1398 STANDARDS)BOTH TO NATURAL GRADUAL LOWERING OF THE TRUCK DURING LOADING AND TO ANY ATERAL IMBALANCE. -RAMP STOP DEVICE TRIGGERS IF TRUCK MOVES AWAY, IF LOAD BEING TRANSFERRE IS GREATER THAN 300 Kg, AND REDUCES DESCENT SPEED TO LESS THAN 0,05M/S. -PAINTING AFTER PICKLING WITH 2 RUST PROOFING COATINGS AND APPLICATION AF DARK BLUE RAL 5010 SYNTHETIC GLAZE. -CONTROL PANEL WITH IP 55 INSULATION RATE WITH CIRCUIT BREAKER, 1 "DEAD MAN" CONTROL BUTTON FOR SURFACE LIFT AND LIP ROTATION, MOTOR CONNECTION CABLES, 8 METRES LONG, FLAMEPROOF(CONFORMING TO IEC 20/22-2 STANDARDS). -TOUGH RUBBER GUARDS AGAINST BLOWS ALREADY APPLIED TO FRAME. - SIDE DEVICES PROTECTING AGAINST AMPUTATION OF FEET WITH YELLOW/BLACK ZEBRA STRIPE -RAMP STOP SAFETY ROD FOR INSPECTION/MAINTENANCE -CE MARKING AND INSTRUCTION MANUAL	OUR ELETRICALLY POWERED HYDRAULIC RAMPS ARE CONSTRUCTED IN STRICT COMPLIANCE WITH EUROPEAN DIRECTIVES EN 1398, WICH ARE CURRENTLY THE STRICTEST AND MOST SPECIFIC FOR LOADING/UNLOADING RAMPS. THEY ARE MADE WITH A TOUGH SELF-SUPPORTING FRAME(NO FOUNDATION IS REQUIRED IN THE HOUSING PIT), RAMP SURFACE STRUCTURE CONSIST OF WELDED SECTIONS COVERED IN BUCKLE NON-SLIP SHEET METAL, LIP ROTATING 90°, HYDRAULICALLY DRIVEN, BENT AND MILLED TO OBTAIN THE SMALLEST STEP TO LINK UP TO THE TRUCK BED.
Rapidly rolling doors Speed-Roll

STripe barriers Stripe

Dock levellers

Fire stop doors

		TECNOINDUSTRIALE products are building to works always well
	COPYRIGHT 1978-2007 TECNOINDUSTRIALE.IT Automatic doors Automatic loading ramp for cargo bay Dock shelter for cargo bay Pvc dinamic tunnel
Home